Answer:
Do you know cars? If not, its not that hard. First check in the manuel if you have to change the oil after running the car for alittle while also check to see if you have the correct oil.(which can probably be bought at your local acura dealer's service center. After that jack the car up perferably with wheel stands, but if not put it on jack stands. Turn off the engine. Make sure the car is balanced and on level ground and that if you have to go under the car while it's up make sure someone is with you.(very important) Then get an oil pan and some old rags find the drain plug and unscrew it, but beaware that there will be a rush of hot oil. Let it drain into the pain. Then put plug back on and tight. Then get a funnel and put the right amount(in manuel) of oil in. Watch how quickly you pore because it might over flow, don't put too much in it's no good just the right amount. Also it happened to me make sure that nothing is in the path of the draining oil because once the oil was all over the under body and a pain to clean up. Also try www.ehow.com/how_11_change-motor-oil.html Hope this helps.